70nm Copper Zinc Alloy Nanopowders Cu-Zn Nanoparticles

Copper zinc alloy nanoparticles has high surface area,widely used in lubricating additives and catalyst.

Copper zinc alloy nanoparticles factory direct offer, are widely used in lubricating additives and catalyst.

Cu-Zn alloy nanopowders, particle size ＜150nm, Cu:Zn=65:35 / 5:5. ratio adjustable, factory price. If need other particle size,kindly contact us for customize service to check feasibility, thanks.

WC Nano Tungsten Carbide Powder is stable in air,good inoxidizability and active sinter capability,with high performance nano crystalline.

      Titanium dioxide material can selectively etch metal nanoparticles through electron transfer with metal Ag nanoparticles in the excited state, and change the optical absorption characteristics of the material, thus the Ag/Tio2 nanomaterials can change color under the light excitation of different wavelengths.       Experimental demonstration: 1) 500 ℃ heat treatment was carried out on the TIO2 thin film，it is helpful for photocatalytic deposition of Ag particles, and Ag/TIO2 thin film has the obvious photochromic phenomenon; 2) as the content increase of Ag particles deposited on TIO2 films, the photochromic rate of Ag/TIO2 films increases correspondingly, but the reaction rate of photochromic reaction is inhibited when the content of Ag particles exceeds a certain amount.       If you're interested in the material, please not hesitate to contact us , and we will make a tailor for matching your products.

catbon nanotube powder avialable in SWCNTs, DWCNTs and MWCNTs with all kinds of size , for the more details please contact me freely.

      Hongwu International Group LTD offer a highly diverse range of Cobalt particles grades with average grain sizes from approx. 20nm to 1um. We provide technical support in the selection of the powders suitable for specific applications. Stock# A050, 20NM Cobalt nano particles Stock# A051, 100-150NM Cobalt nano particles Stock# B052, 1-3UM Cobalt particles, grey solid powder.       Cobalt particle is the best binder for cemented carbide. Although iron, cobalt powder, nickel powder generations have made some progress, still more than 90% of the carbide cobalt used as binder. In order to improve the organizational structure of carbide, improve performance and reduce the size of cobalt powder has very important significance. To reduce the average particle size of the binder powder can improve the transverse rupture strength, hardness and density. To use the ultra-fine cobalt powder manufacturing high-performance WC-Co cemented carbide, requests the cobalt nano particles average particle size to achieve to less than 500nm. In such particle size could produce excellent adhesive. With the small particle size Cobalt powder to make WC-Co whose abrasion resistance and crack resistance is much better than the alloy produced with coarse cobalt powder.        If you're interested in cobalt nano particles, please feel free to contac us. by Lyla

Large SSA ceramic grade MGO Magnesium Oxide nanopowders   R652: Magnesium Oxide NanoPowder(MgO), 20-30nm, 99.9%, white solid powder.   Application of MGO Magnesium Oxide nanopowders in ceramic field 1. Preparation of ceramic capacitor dielectric material. The grain size of the obtained ceramic can be controlled within the range of 1000nm, with small dielectric loss, good material uniformity, which is suitable for the production of  multilayer ceramic capacitor with large-capacity, high insulation resistance, ultra-thin dielectric layer (dielectric layer is less than 10um). The addition amount is about 0.5%-5%. 2. Nano-ceramic powder, made of nano magnesium oxide, nano silica, nano alumina, nano zinc oxide and other powders, among which, nano magnesium oxide is 0.5%-4.0%, and the obtained nano ceramic powder having a far-infrared radiation, antibacterial, activated water, purified water, the dissolution of trace elements which are beneficial to human health, release of negative ions, improve seed germination rate and other healthy functions. It can be widely used in various ceramic products, environmental protection, textiles, drinking water treatment, equipment and containers such as alcohol and tobacco industries. 3. Sintered with nano Alumina( nano Al2O3), titanium dioxide(TiO2) and other together, obtaining nanocomposite ceramic additives can take place of precious metals Nickel/Ni to produce heat-resisting steel alternative. Wherein the amount of nano-magnesium oxide is 5%-18%. 4. Nanocrystalline composite ceramics makes use of nano titanium dioxide(TiO2), MGO Magnesium Oxide nanopowders, nano rare earth oxides and zirconium dioxide(ZrO2) as part of the additives, and successfully increased the content of Amorphous ZrO2 to 10-30wt%, and obtained a high zirconium Al2O3 -SiO2-ZrO2 ceramics, nanocrystalline composite ceramics, and crystal phase content is more than 90%, the main phase is mullite, cristobalite and tetragonal zirconia, tetragonal zirconia grains dispersed in which size is ≤1μm. Through this method, the properties of the materials are superior to that of conventional methods for preparing the same material. The hardness increased by 30%, the toughness increased by 6%, and the strength increased by 40%. 5. The glass ceramic coating,composed of MGO Magnesium Oxide nanopowders, nano silica(SiO2), boron oxide, nano alumina(Al2O3), cerium oxide nanoparticles, can effectively improve the mechanical strength of the catalyst, including abrasion resistance, hardness, compressive strength and impact resistance; and enhance active centers of the catalyst, thereby increasing the activity of the catalyst, saving the active ingredient and reducing costs. It is mainly used in diesel and gasoline engine for exhaust gas purification treatment processors. Wherein the amount of nano magnesium oxide(MgO) is 5%-18%. 6. Preparation of high toughness ceramic materials, using nano magnesium oxide(MgO) and yttrium oxide(Y2O3) or rare earth oxide as nano composite stabilizer to produce partially stabilized zirconia ceramics with excellent mechanical properties and resistence of high-temperature aging. The ceramic material can be widely used in high-temperature engineering components and advanced refractories. 7. As auxiliary components of the anti-reducing dielectric ceramic material. The addition amount is 0.001%-10mol% 8. As single-side carbon dioxide gas shielding arc welding ceramic plate material. Its addition amount of nano MgO is 1-10 wt% 9. The glass ceramics, nano silica(SiO2), nano titanium dioxide(TiO2), nano alumina(Al2O3), nano magnesium oxide(MgO) sintered glass ceramics can be processed by the float glass method to be transparent, especially for thin film semiconductor substrate, specifically applicable to the display and solar cell. Wherein the amount of nano magnesium oxide(MgO) is 6%-20%. by Corrine    

Nano ATO dispersion, could do the particle size at <10nm, 20-40nm, <100nm, 99.9% purity, could do it according to your required concentration.

Since 2002 China factory offer spherical morphology Si nanopowders in good and stable quality, both sample orders and batch orders are available. Any need welcome to inquiry. 

Nanometer sized copper powders CU for preparation immune enhancement drug use.

Violet Tungsten Oxide is key material of manufacting super-fine Tungsten powders and Tungsten Carbide nanopowders.