99.5% Electronic Slurry Zr Zirconium Powders Price

4-6um Zirconium  nanopowders  with the purity of 99.5% apply to the nuclear industry.

Metal zirconium powders is anti-corrosion, flammable,easy oxidized,widely used in nuclear reactors.

4-5 um Zirconium powders with the purity of 99.5% apply to the nuclear industry.

Copper zinc alloy nanoparticles has high surface area,widely used in lubricating additives and catalyst.

Silver nanowire powder with high specific surface area, electrical conductivity, thermal conductivity, high dispersed properties.

nano zinc oxide as organic active agent, widely used as vulcanization accelerator.

In yttrium-added zirconium oxide, yttrium oxide is used as a stabilizer, and this material is mainly a tetragonal structure. It has the highest flexural strength of all zirconia materials, especially when sintered and pressed. Yttrium stabilized zirconia has fine grains and is suitable for use in cutting tools due to its high wear resistance. It is used to cut a very sharp corner part. The excellent crystal grains make the produced ceramics dense, without many pores, and have excellent mechanical strength, corrosion resistance, impact toughness, thermal shock resistance and extremely low thermal conductivity. Because of these characteristics, yttrium stabilized zirconia is mainly used in wear-resistant parts, cutting tools and thermal barrier coatings.

Thermo stability ceramic zirconia spray nozzle

HONGWU Single crystal nano diamond with uniform particle size and strong crystallinity. It possesses excellent dispersibility and resistance to corrosion, making it suitable for corrosion-resistant coatings, specialty functional coatings, and additive use in composite materials. It is also highly effective for precision polishing in the optical, semiconductor, and gemstone industries, and can be used in the production of diamond tools and electroplated diamond products.

Nano Gold Au Powder has excellent properties of strong magnetic particles to eliminate free radicals,powerful anti-oxidation,anti-aging. Au gold nanoparticles are widely used as colorant, rapid detection, carrier, catalyst, etc.. Sizes of nano gold can be adjustable and nano Au water dispersion is also available.

High filling & low viscosity flake silver powders for epoxy resin conductive adhesive use       Conductive adhesive is a special kind of adhesion agent, mainly composed of resin and conductive fillers, such as silver powder, gold powder, copper powder, nickel powder, graphite powders, etc.), can be used as adhesive materials in microelectronics components, encapsulation manufacturing process.         Conductive adhesive with flake silver powder has excellent electrical conductivity, adhesion and chemical stability. Silver powder almost not be oxidized in the rubber, in air its oxidation speed is very slow, even if is oxidized, silver oxide generated still has good electrical conductivity. therefore, in the market, especially on the high reliability requirements of electric installation, flake silver powders as conductive filler is used mostly. And in the choice of matrix resin, epoxy resin is the best because of its high content of active group, high cohesive strength, good adhesion and excellent mechanical properties.       HW NANO flake silver powder, with particle size <1um, 1-3um,5-8um,10um, purity 99.99%. Specific surface area and apparent/bulk density are adjustable flexibly. It is available with small quantity for researchers and bulk order for industry groups.          Silver powder filling quantity influence on the properties of conductive silver glue. after silver powders as conductive filler is added to the epoxy adhesive, the conductive mechanism is the contact between of silver powders.After system curing, silver powders connect into chain circuit with each other, presents the conductivity. the data shows that the adding quantity of silver powder to 80% or so, the conductivity is the best.  

γ-Al2O3 nanopowders is high purity 99.99%, has high active performance, widely used as catalyst.