Metal tin powder, metal alloy used tin metal powder, tin powder price

Superfine high active tin nanopowders widely used in conductive coating.

99.9%  black nano tin powder used for the activated sintering additives. 

China factory direct offer quality nano Sn powder Tin nanoparticles, 99.9% high purity,  70nm / 100nm / 130nm. Nano Sn can be applied for lubricant additives.

China factory direct offer quality nano Sn powder Tin nanoparticles, 99.9% high purity,  70nm / 100nm / 130nm. Nano Sn can be applied for lubricant additives.

Hongwu Nano Tin particles Sn has a high theoretical capacity (for example, 994mah/g), and tin-based anode material is considered to be one of the ideal substitutes for commercial graphite-like carbon materials (372mah/g) to meet the following a generation of high-capacity lithium-ion battery needs.

IRO2 Iridium(IV) oxide nanoparticles, common available smallest size is 20-30nm with 99.95%. 20nm-5um particles size can be adjustable as required. The element iridium(Ir) nanopowder is also available.

Hongwu Nano supply various Silver coated Copper powder for different application

Hongwu International Group Co., Ltd. has been a nanomaterial manufacturer since 2002.Nano-Silicon Dioxide can be used in the ceramic industry, etc., 20-30nm, with a purity of 99.8%.

       Nano ITO indium tin powder is a new kind of high-functional inorganic material with a size of 1-100nm which is oriented to the 21st century. Because of miniaturization of crystal grains,its surface electronic structure and crystal structure change, resulting in a surface effect, volume effect, quantum size effect and the macro-tunnel effect and high transparency, high dispersion and so on that a macroscopic object does not have. In the aspects of photoelectric sensitivity, nano ITO has the special properties and new uses that the ordinary indium tin oxide can not match, such as used as stealth materials, solar collector materials and collectors ect.         Nano ITO indium tin oxide powder is an excellent semiconducting material that with outstanding properties, which is widely used in conductive shell, gas sensor, photodetector, liquid crystal display and so on. In recent years, nano powder preparation technology continues to develop and improve, but the nanopowder has a high active surface, the surface hanging a lot of free radicals, so when adding some other matrix materials in nano powder, it is easily to lead to the formation of large particles of nano particles agglomeration, which play a significant impact on the properties’ performance of optical, electrical, magnetic and other aspects. Therefore, it is very important to disperse the powders well before using, which can help the ITO particles achieve the best properties.         Taken the ITO powder as raw material, through a certain process to prepare ITO powders into a ITO rods, also known as ITO target (ITO ceramic target). With the ITO target, it can be further to manufacture TIO transparent conductive film glass. The main component of ITO film is indium tin oxide. In the case of a thickness of only a few thousand angstroms, indium oxide is with high transmittance and tin oxide has conductive ability. Liquid crystal display used in ITO glass is a high transmittance of conductive glass. by Jemma  

Nano nickel oxide particles has good catalyst performance,widely used in battery electrode materials.

Nano Nickel Powder have huge specific surface area and high activity,with strong catalytic effect and high powder state.

In yttrium-added zirconium oxide, yttrium oxide is used as a stabilizer, and this material is mainly a tetragonal structure. It has the highest flexural strength of all zirconia materials, especially when sintered and pressed. Yttrium stabilized zirconia has fine grains and is suitable for use in cutting tools due to its high wear resistance. It is used to cut a very sharp corner part. The excellent crystal grains make the produced ceramics dense, without many pores, and have excellent mechanical strength, corrosion resistance, impact toughness, thermal shock resistance and extremely low thermal conductivity. Because of these characteristics, yttrium stabilized zirconia is mainly used in wear-resistant parts, cutting tools and thermal barrier coatings.