Highly dispersed nano Pt platinum colloid for sale

nano Pt ( platinum ) particles water dispersion, concentration 1000ppm ( 0.1%) nano Pt is widely used as catalyst, making into dispersion make it easy and convenient for customer use.

As a functional material, nano Pt has important application value in the fields of sensors, catalysis, fuel cells, , electronics, optics and electromagnetism. The good catalytic performance makes it work well in titrant.

Rhodium Rh Nanopowders have 20-30nm with 99.95% purity use as the electric instrument and  chemical industry.

Nano graphene oxide powder single layer GO powders, China factory direct offer, favorable price. thickness:0.6-1.2nm,Length:0.8-2um,99%

Nano Silver-tin alloy(Hongwu nanomaterial is supplying it) is a binary alloy of silver and tin, which is a kind of low temperature solder. It is suitable for brazing copper alloy and other parts which are limited in temperature and require high strength.

Silicon Carbide (SiC) Nanopowder / Nanoparticles (SiC, beta, 99%, 50nm, cubic)   Technical parameters of Silicon Carbide (SiC) Nanopowder / Nanoparticles： Particle size: 50nm, 100nm, 500nm, 100-200nm, 0.5um, 1-2um, 5um, 7um, 10um, 15um Purity: 99% Note: Other size specifications of the products, we can provides customized production. Decomposition Temperature: 2973k Thermal Expansion Coefficient: 6.58x10-6 at 373k Thermal Expansion Coefficient: 2.98x10-6 at 1173k Compressibility Coefficient: 0.21x10-6 Density (288k): 3.216 g/cm3 Hardness: 9.5 Mohs Heating Power (KJ/mol): 30.343   Characteristics of Silicon Carbide (SiC) Nanopowder / Nanoparticles： 1. Beta SiC powder has high chemical stability, low thermal expansion coefficient, high thermal conductivity, resistance temperature characteristics is opposite to metal; 2  Beta SiC powder has high hardness, with Mohs hardness of 9.5, next to the dismond, is the wear-resisting material; 3. Beta SiC powder has high temperature resistance, corrosion resistance, resistance to acid and alkali solvent 4. Beta SiC powder has good toughness, superior grinding performance, excellent thermal conductivity of electricity.   Application fields of Silicon Carbide (SiC) Nanopowder / Nanoparticles：       As modified high strength nylon material: nano Beta SiC powder has good compatibility dispersion in polymer composites, and good basic associativity, after modified the strength of nylon alloy tensile is 150% higher than ordinary PA6, wear-resisting performance increased more than three times. Mainly used for the armored tracked vehicle polymer parts, automotive steering parts, textile machinery, mining machinery lining board.       As modified special engineering plastics polyether ether ketone (PEEK) wear-resisting performance: when adding quantity is approximately 5%, can greatly improve and raise the wearability of PEEK (increased by more than 30%)         More information, pls contact us at hwnano@xuzhounano.com. by Alisa

UV Resistance used Nano Rutile Titanium Dioxide Powder R-TiO2 Nanoparticle

20nm, 50nm, 80nm Silver Nanopowders is widely used in antibacterial medicine,textile,rubber and so on.

Anatase nano titanium dioxide has a good photocatalytic effect and is widely used in photocatalysts and air purification products.

Silicon Carbide nano particle dosage influencing on composite friction performance       For Silicon carbide nano particle is with Moh’s hardness about 9.2 which is a hard material. With its hardness, SiC nano powder is suitable to be additive for composite material and improve their toughened and strengthened.        For SiC nano additive has different influence to the relative density, hardness, electrical conductivity and friction and wear properties of the composites. Generally the relative density of the composites decreased with the increase of the content of nano SiC particles. The hardness of the composites increased with the increase of the content of SiC nano particles, but when the nano  SiC particles agglomerated, the hardness increased . However the content of silicon carbide nano powder affect to the conductivity of material is opposite. When the content of  SiC nano particle increase the conductivity of the composite decreases. According to some study when the content of SiC particles is about 0.5% -3%, the wear rate of the composites decreases with the increase of SiC content. When the SiC content is more than 3%, the wear rate of the composites increased with the increase of the content of  SiC nano-particles. The abrasive wear and the friction coefficient decreased with the increase of the SiC content. We provide our customers:   High quality silicon carbide particles(50nm,100nm,500nm,1um,5um,7um,10um,15um)   Volume pricing   Reliable service   Technical assistance Our products are all available with small quantity for researchers and bulk order for industry groups.  If you have any questions, please feel free to contact us. thank you. by Lyla

Zinc white Zinc Oxide ZnO Nanoparticle in particle size 20-30nm with 99.8% purity.

As Lubricant Additive Nano Zirconium Dioxide Powder