Ultrathin Palladium Nanowires(Pd)

Palladium nanoparticle product in 20-30nm, 99.95% with high quality ,mini order is 15g.

Large SSA ceramic grade MGO Magnesium Oxide nanopowders   R652: Magnesium Oxide NanoPowder(MgO), 20-30nm, 99.9%, white solid powder.   Application of MGO Magnesium Oxide nanopowders in ceramic field 1. Preparation of ceramic capacitor dielectric material. The grain size of the obtained ceramic can be controlled within the range of 1000nm, with small dielectric loss, good material uniformity, which is suitable for the production of  multilayer ceramic capacitor with large-capacity, high insulation resistance, ultra-thin dielectric layer (dielectric layer is less than 10um). The addition amount is about 0.5%-5%. 2. Nano-ceramic powder, made of nano magnesium oxide, nano silica, nano alumina, nano zinc oxide and other powders, among which, nano magnesium oxide is 0.5%-4.0%, and the obtained nano ceramic powder having a far-infrared radiation, antibacterial, activated water, purified water, the dissolution of trace elements which are beneficial to human health, release of negative ions, improve seed germination rate and other healthy functions. It can be widely used in various ceramic products, environmental protection, textiles, drinking water treatment, equipment and containers such as alcohol and tobacco industries. 3. Sintered with nano Alumina( nano Al2O3), titanium dioxide(TiO2) and other together, obtaining nanocomposite ceramic additives can take place of precious metals Nickel/Ni to produce heat-resisting steel alternative. Wherein the amount of nano-magnesium oxide is 5%-18%. 4. Nanocrystalline composite ceramics makes use of nano titanium dioxide(TiO2), MGO Magnesium Oxide nanopowders, nano rare earth oxides and zirconium dioxide(ZrO2) as part of the additives, and successfully increased the content of Amorphous ZrO2 to 10-30wt%, and obtained a high zirconium Al2O3 -SiO2-ZrO2 ceramics, nanocrystalline composite ceramics, and crystal phase content is more than 90%, the main phase is mullite, cristobalite and tetragonal zirconia, tetragonal zirconia grains dispersed in which size is ≤1μm. Through this method, the properties of the materials are superior to that of conventional methods for preparing the same material. The hardness increased by 30%, the toughness increased by 6%, and the strength increased by 40%. 5. The glass ceramic coating,composed of MGO Magnesium Oxide nanopowders, nano silica(SiO2), boron oxide, nano alumina(Al2O3), cerium oxide nanoparticles, can effectively improve the mechanical strength of the catalyst, including abrasion resistance, hardness, compressive strength and impact resistance; and enhance active centers of the catalyst, thereby increasing the activity of the catalyst, saving the active ingredient and reducing costs. It is mainly used in diesel and gasoline engine for exhaust gas purification treatment processors. Wherein the amount of nano magnesium oxide(MgO) is 5%-18%. 6. Preparation of high toughness ceramic materials, using nano magnesium oxide(MgO) and yttrium oxide(Y2O3) or rare earth oxide as nano composite stabilizer to produce partially stabilized zirconia ceramics with excellent mechanical properties and resistence of high-temperature aging. The ceramic material can be widely used in high-temperature engineering components and advanced refractories. 7. As auxiliary components of the anti-reducing dielectric ceramic material. The addition amount is 0.001%-10mol% 8. As single-side carbon dioxide gas shielding arc welding ceramic plate material. Its addition amount of nano MgO is 1-10 wt% 9. The glass ceramics, nano silica(SiO2), nano titanium dioxide(TiO2), nano alumina(Al2O3), nano magnesium oxide(MgO) sintered glass ceramics can be processed by the float glass method to be transparent, especially for thin film semiconductor substrate, specifically applicable to the display and solar cell. Wherein the amount of nano magnesium oxide(MgO) is 6%-20%. by Corrine    

Thermo stability ceramic zirconia spray nozzle

Hongwu brand Spiny spheroids nickel powder(<1um, 99%) has a wide range of applications in electronic materials, conductive materials, catalysis, magnetic recording materials, polymers and self-lubricating materials.

50NM 99% Ultrafine Beta Silicon Carbide SIC Nanoparticle/Nanopowders appear in the form of a grayish green powder having a cubic morphology. The physical properties of these nanoparticles are as below: Basic property:  Decomposition Temperature (K): 2973 Heating Power (KJ/mol): 30.343 Linear Expansion Coefficient (373K): 6.58*10-6 Linear Expansion Coefficient (1173K): 2.98*10-6 Compression Coefficient: 0.21*10-6 Silicon Carbide SIC Nanoparticle/Nanopowders data sheet as follows:  Basic infomation  50nm,99%,beta  Appearance Grayish-green solid powder  Stock#  D501  CAS No.  409-21-2  Hardness (Mohs)  9.5  Density (288K) (g/cm3)  3.216  Synonyms  silicon carbide, sic, carborundum,beta sic, cubic sic, nanoparticles,nanopowders  Capacity  by order, contact us as hwnano@xuzhounano.com Silicon carbide behaves almost like a diamond. It is not only the lightest, but also the hardest ceramic material and has excellent thermal conductivity, low thermal expansion and is very resistant to acids and lyes. typical application for silicon carbide components is dynamic sealing technology using friction bearings and mechanical seals, for instance in pumps and drive systems. Compared to metals, silicon carbide enables highly economical solutions with longer tool life when used with aggressive, high-temperature media. Silicon carbide ceramics are also ideal for use in demanding conditions in ballistics, chemical production, energy technology,  paper manufacturing and as pipe system components. HW NANO can supply 7 kinds of sized silicon carbide SIC nanoparticles including 50nm, 100nm, 0.5um,1-2um,5um, 7um, 15um. purity 99%. Our silicon carbide SIC nanoparticles is available in a wide range of quantities and specifications to meet your particular industrial or scientific application. For further technical information or pricing on silicon carbide SIC nanoparticles , contact us freely, please.

Customized service of Zirconia Ceramic Piston Plunger is provided by Hongwu Nano, as well as other custom made zirconia ceramic parts.

UV Resistance used Nano Rutile Titanium Dioxide Powder R-TiO2 Nanoparticle

Si3N4 powder is available in beta phase and alpha phase, nano size and micron size, 99.9-99.99%.

Alpha Nano Alumina Powder for Polishing ( α Al2O3 nanoparticles ) ,China leading manufacturer, good and stable quality, both sample and batch order can be assured quality and service, any need welcome to inquiry.

HW offer Zn nanopowder with several specifications: 40nm /70nm / 100nm / 130nm, high purity 99.9%, spherical  It can be applied for rubber vulcanization active agent, anti-corrosion coating, etc.

Water soluble nano ATO powders has good electric conductivity.

Silver Nanoparticles Water Aqueous Dispersion is generally with the size of 5-20nm, while other size can be adjustable. Nano Ag dispersion is mostly used for antibacterial field with excellent performance, low addition, good long lasting effect, wide application fields.