100NM 99% Titanium Carbide Nanoparticles (TIC)

Good conductive and thermal titanium carbide nanopowders used in production of cemented carbides.

99% Titanium Carbide Powders have the high intensity apply to the melting pot made of metal tongs.

Nano Titanium Carbide TiC Powder have high temperature resistance and high intensity,good thermal conductivity, anti-oxidation and good toughness.

Titanium carbide nanopowder reinforcing phases can be used as a ceramic material, a metal effective to improve the mechanical properties of ceramic matrix material and conductive properties.

Titanium carbide nanopowder, high temperature, anti-oxidation, high strength, high hardness, good thermal conductivity, has good electrical conductivity.

High Quality Zirconia ceramic bearing

Adding nano alumina powders to insulators, insulation performance is better.

Hongwu Nano supplys ruthenium(IV) oxide and ruthenium nanopowders, 20nm-1um, 99.99%. Also other nano pricious metal nanopowders, nano dispersion can be customized too.

50NM 99% Ultrafine Beta Silicon Carbide SIC Nanoparticle/Nanopowders appear in the form of a grayish green powder having a cubic morphology. The physical properties of these nanoparticles are as below: Basic property:  Decomposition Temperature (K): 2973 Heating Power (KJ/mol): 30.343 Linear Expansion Coefficient (373K): 6.58*10-6 Linear Expansion Coefficient (1173K): 2.98*10-6 Compression Coefficient: 0.21*10-6 Silicon Carbide SIC Nanoparticle/Nanopowders data sheet as follows:  Basic infomation  50nm,99%,beta  Appearance Grayish-green solid powder  Stock#  D501  CAS No.  409-21-2  Hardness (Mohs)  9.5  Density (288K) (g/cm3)  3.216  Synonyms  silicon carbide, sic, carborundum,beta sic, cubic sic, nanoparticles,nanopowders  Capacity  by order, contact us as hwnano@xuzhounano.com Silicon carbide behaves almost like a diamond. It is not only the lightest, but also the hardest ceramic material and has excellent thermal conductivity, low thermal expansion and is very resistant to acids and lyes. typical application for silicon carbide components is dynamic sealing technology using friction bearings and mechanical seals, for instance in pumps and drive systems. Compared to metals, silicon carbide enables highly economical solutions with longer tool life when used with aggressive, high-temperature media. Silicon carbide ceramics are also ideal for use in demanding conditions in ballistics, chemical production, energy technology,  paper manufacturing and as pipe system components. HW NANO can supply 7 kinds of sized silicon carbide SIC nanoparticles including 50nm, 100nm, 0.5um,1-2um,5um, 7um, 15um. purity 99%. Our silicon carbide SIC nanoparticles is available in a wide range of quantities and specifications to meet your particular industrial or scientific application. For further technical information or pricing on silicon carbide SIC nanoparticles , contact us freely, please.

Nano magnesia powder, particle size 20-30nm with 99.9% purity,widely used as composite ceramic materials.

In yttrium-added zirconium oxide, yttrium oxide is used as a stabilizer, and this material is mainly a tetragonal structure. It has the highest flexural strength of all zirconia materials, especially when sintered and pressed. Yttrium stabilized zirconia has fine grains and is suitable for use in cutting tools due to its high wear resistance. It is used to cut a very sharp corner part. The excellent crystal grains make the produced ceramics dense, without many pores, and have excellent mechanical strength, corrosion resistance, impact toughness, thermal shock resistance and extremely low thermal conductivity. Because of these characteristics, yttrium stabilized zirconia is mainly used in wear-resistant parts, cutting tools and thermal barrier coatings.

Fullerene C60 is a good superconducting material or catalyst material.