DWCNT Double-Walled Carbon Nanotubes Water Dispersion

MWCNTs Multi Walled Carbon Nanotubes Water Dispersion can be customized at different concentration, such as 1-5%. Or the functionalized types are also available.

MWCNTs Multi Walled Carbon Nanotubes Aqueous Dispersion can be produced with different diameter (10-100nm), lengths(short 1-2um, long 5-20um) and adjusted concentration 2%-5%.

Single-walled Carbon Nanotubes aqueous dispersion is a customized material for easier usage in water base. SWCNT water dispersion's concentration can be adjusted.

Multi-walled carbon nanotube dispersion is a carbon nanotube dispersion that is uniformly dispersed in an aqueous system by means of dispersion to form a liquid with good dispersibility and stability, which is not easy to stratify or precipitate, and is easy to add to application systems.

Double walled carbon nanotubes can be dispersed in water to make aqueous dispersion for easier use as required. DWCNT water dispersion can be customized as per requirements for better application.

Water dispersion of SWNT may facilitate the incorporation of individual nanotubes into the matrix for reinforcement of the composite materials.

Single-walled Carbon Nanotubes aqueous dispersion is a customized material for easier usage in water base. The concentration of SWCNT water solution can be adjusted. Besides SWCNT type, double and multi walled CNTs dispersions are also available.

Black solid powder Pd Palladium Nanoparticles is the high efficient catalyst which used in electronic industry. HW NANO supply high and stable quality Pd nano powders, high purity, adjustable particle size, customized dispersion.

50nm high purity nano innorganic Germanium powder supply from china.

Blue grey high purity nano Indium Tin ITO powder used for transparent conductive electrode in liquid crystal displays 

In yttrium-added zirconium oxide, yttrium oxide is used as a stabilizer, and this material is mainly a tetragonal structure. It has the highest flexural strength of all zirconia materials, especially when sintered and pressed. Yttrium stabilized zirconia has fine grains and is suitable for use in cutting tools due to its high wear resistance. It is used to cut a very sharp corner part. The excellent crystal grains make the produced ceramics dense, without many pores, and have excellent mechanical strength, corrosion resistance, impact toughness, thermal shock resistance and extremely low thermal conductivity. Because of these characteristics, yttrium stabilized zirconia is mainly used in wear-resistant parts, cutting tools and thermal barrier coatings.

Ag nano flakes widely used in printed electronics, has excellent printability.