Oleic Acid Coated Superfine Anti Corrosive Titanium Nanopowder

                             Oleic Acid Coated Superfine Anti Corrosive Titanium Nanopowder

Spec: 40nm, 99.9%,high active, oleic acid coated.

Application for titanium nanopowder:

1. Titanium nanopowder, high purity, uniform particle size, high surface activity, can be sufficiently applied coatings, resins, could allow ordinary coating add wear and corrosion resistance properties of other items, secondly, coating hardness and wear resistance increased significantly, it also has the magical ability to repair itself, can be used as metallic, non-metallic materials common Putty.

2. Nano-titanium powder coating than micron titanium powder coatings with good protective properties. As the titanium nanopowder formed is chemically bonded in the coating, the coating is reduced to increase due to the presence of metallic titanium caused the number of carriers, and thus the resistance changes in the order of micrometers coating of titanium powder coating resistance variation different, Further variation of the resistance of the coating can not be explained by changes in the dielectric constant.

3. Add the modified titanium nanopowder after the epoxy matrix and adhesion between there was a marked improvement in the strength of the modified nano titanium powder coating, stiffness and plasticity are better than epoxy varnish coating, to improve the traditional epoxy varnish brittleness problem of high proportion of modified nano titanium powder were 1%, 5%, 10% of the epoxy coating, through corrosion, adhesion and tensile tests showed that adding 1% modified nano titanium powder corrosion resistance and mechanical properties of the coating is best.