One-dimension material zinc oxide ZNO nanowires for Antibacterial use

HONGWU NANO factory direct offer Zic Oxide Nanowires. can be applied for catalyse, antibacterial, sensors, etc.

Zinc Oxide ZnO Nanorods have high mechanical strength, high luminescence efficiency, low laser emission threshold, high chemical stability,widely used in catalysis, photoelectric, magnetic and sensitive fields.

Zinc oxide nanowires could supply the diameter <100nm, length >5um length, widely used as a sensitve materials.

Zinc Oxide nanowires/ZnO NWs, as an ideal material for the preparation of a Schottky contact type devices. Hongwu nanometer is professional manufacturer, supplier and exporter in china for nano materials in china. Our ZNO zinc oxide nanowires specification as follows: 1. D<100nm,L>5um,99.9%                2. D:100-200nm,L>1um,99.9%                          As nucleic acid detection is more and more widely applied to genotyping technology, clinical diagnostics and biomedical research and other fields, the traditional optical detection and real-time PCR technology have some disadvantages, such as high cost, no longer can meet the demand that the devices require the testing with high cost-effective, high speed and high sensitivity. By contrast, the one-dimensional material represented by the unmarked detection device, because of a high specific surface area, can offer the possibility for low-cost, simple and effective DNA testing. FET based on semiconductor nanowires is such a great potential device. Wherein, changing the metal - semiconductor interface of Schottky barrier height(SBH)can modulate device performance, which is a hotspot for researchers.        Zinc Oxide nanowires/ZnO NWs with excellent semiconductor and piezoelectric performance, is an ideal material for the preparation of a Schottky contact type devices. Researchers of the National Center for Nanoscience and other institutions made use of exerting external strains on Zinc Oxide nanowires to produce piezoelectric potential. Then on the basis of piezoelectric effect, the potential can be increased or decreased the effect of SBH link interface the carrier transportation, so that change the properties of nanowire-based devices. In addition, making specific hybridization between probe complementary target cDNA and nanowire adsorbed single-stranded DNA (the ssDNA), the device can achieve selective detection function.       The experimental results of this work showed that, when the compressive strain applied to the Zinc Oxide nanowire-based DNA sensor became -0.59%, the relative value of the current response increased by 454%. This fully illustrated that the modified method using a piezoelectric device electronics effect can significantly improve the detection performance of the Schottky contact type ZnO nanowire based DNA sensor.

IRO2 Iridium(IV) oxide nanoparticles, common available smallest size is 20-30nm with 99.95%. 20nm-5um particles size can be adjustable as required. The element iridium(Ir) nanopowder is also available.

100nm,99.9% silicon nitride nano powders with high quality use as the molds, cutting tools, turbine blades, turbine rotor and the cylinder wall coatings so on.

Nanodiamonds not only have the unique properties specified by diamond, but also have the singular properties possessed by nanomaterials. It is precisely because of these comprehensive technical characteristics that it has been well applied in both traditional and new fields.

High dispersed Conductive Cu Copper nanowires for sale at competitive prices.

Silicon Carbide nano particle dosage influencing on composite friction performance       For Silicon carbide nano particle is with Moh’s hardness about 9.2 which is a hard material. With its hardness, SiC nano powder is suitable to be additive for composite material and improve their toughened and strengthened.        For SiC nano additive has different influence to the relative density, hardness, electrical conductivity and friction and wear properties of the composites. Generally the relative density of the composites decreased with the increase of the content of nano SiC particles. The hardness of the composites increased with the increase of the content of SiC nano particles, but when the nano  SiC particles agglomerated, the hardness increased . However the content of silicon carbide nano powder affect to the conductivity of material is opposite. When the content of  SiC nano particle increase the conductivity of the composite decreases. According to some study when the content of SiC particles is about 0.5% -3%, the wear rate of the composites decreases with the increase of SiC content. When the SiC content is more than 3%, the wear rate of the composites increased with the increase of the content of  SiC nano-particles. The abrasive wear and the friction coefficient decreased with the increase of the SiC content. We provide our customers:   High quality silicon carbide particles(50nm,100nm,500nm,1um,5um,7um,10um,15um)   Volume pricing   Reliable service   Technical assistance Our products are all available with small quantity for researchers and bulk order for industry groups.  If you have any questions, please feel free to contact us. thank you. by Lyla

TiB2 titanium diboride powders is mainly used for conductive composite materials.

Find Silver plating copper powder in conductive silicone use, HW NANO is conductive material supplier.

Nano Graphene can be used For Electrochemical Sensor for its excellent high specific surface area, excellent electrical conductivity and biocompatibility, etc..High quality graphene with different specification are supplied by Hongwu Nano, a manufacturer since 2002.