Pure Cubic Phase Nano Silicon Carbide Powder 99.9% High Purity SiC Nanoparticles

Our silicon carbide nanopowder in 50nm, 100-300nm 500nm with high purity 99% sale all around the world.

Hongwu Nano produces the large specific surface area >300m2/g TiO2 nanotubes/Titanate nanotubes used in denitration field showing excellent performance for its good catalystic property.

Single Layer Graphene Powders as the most lightest and thinnest material in the world which will replace an ideal material for the manufacture of silicon transistors in the hyperfine field of microelectronics in the future.

Transparent conductive ITO powder is in 50nm particle size, 99.99% purity,has high visible light transmittance.

China factory direct offer quality nano Sn powder Tin nanoparticles, 99.9% high purity,  70nm / 100nm / 130nm. Nano Sn can be applied for lubricant additives.

Silver nanowires are used for photoresist for its good properties. AgNWs show good flexibility, conductivity and used in capacitor touch screen and other devices.

Nano grade copper particles is available in 20nm,40nm,70nm or more bigger,widely used in sintering additives.

Hongwu copper nanowires has high conducitve, good dispersed,high catalytic activity, widely used in transparent conducive materials.

Silicon nano technology reforming graphite cathode lithium batteries       Cathode technology of the existing lithium batteries has reached the limit. In order to meet the needs of a new generation of energy, the development of new cathode technology of lithium batteries is imminent. Silicon cathode, with the ultra-high specific capacity and rich reserves, has become one of the most representative new technology.     Compared to the traditional graphite cathode, a major obstacle to the Silicon cathode technology on the road of industrialization is that low gel content cause unsatisfactory effect of electrode mixing.     On account of this, some researchers integrated graphite cathode technology and Silicon nano technology and have developed a new and can be mass-produced C- nano Si- graphite composite cathode materials. During the lithiation process, Si nanoshells can be expanded as the volume change. No matter nano-Si hollow shell in the graphite , or a nano-Si intermediate layer between the graphite and carbon, it can keep the shape intact and not be broken or left over between Si and graphite. This special structure, on the one hand to ensure compatibility between the Si and natural graphite, on the other hand avoid the severe side effects caused by traditional mechanical mixing graphite powder and residual Silicon particles.     Silicon Nano Powder is generally immediately available here with particle size 30-50nm,100-200nm,300-500nm,1um. Chinese Hongwu International Group LTD with HW NANO brand can produce most materials in high purity forms and ultrafine particle size. We can also produce materials to custom specifications by request, in addition to custom compositions for commercial and research applications and new proprietary technologies. Typical and custom packaging is available, can provide related data including SEM,TEM,COA,MSDS. Please contact us at hwnano@xuzhounano.com above for information on specifications, lead time and pricing. by Corrine

Spherical  Zinc Oxide ZNO Nanostructures Application     Compared with ordinary zinc oxide, Zinc Oxide ZNO Nanostructures has many other excellent performance. At present the main application areas are rubber products, high-grade paint, ink and paint, sunscreen and anti-ultraviolet fabric, sewage treatment,etc.   1. Zinc Oxide ZNO Nanostructures in Rubber Industry   ZnO nanopowder is the most effective inorganic active agent and vulcanization accelerator in rubber industry.  Zinc Oxide ZNO Nanostructures with small particle size 20-30nm, larege specific surface area, good dispersion, loose, porous, good liquidity and good affinity with rubber, easily dispersed whilc melting, low heat plastic material, breaking small deformation , good elasticity, can improve the material process performance and physical properties, thus it's used in the manufacture of high-speed wear-resistant rubber products, such as aircraft tires, high-class passenger car radial tire, with performance of anti-aging, anti-friction fire, long life, and greatly improves finish, mechanical strength, temperature and aging resistance of rubber products,especially wear resistance.  In addition, Zinc Oxide nano as a vulcanization system in the rubber system, whose additive is high.The large specific gravity and  filling amount of ordinary ZnO, whose influence on its material density, product life and energy consumption is detrimental. However, the use of Nano grade Zinc Oxide, the amountis only 30% -50% compared to the ordinary one,which reduces the cost of production, and the performance in the tensile properties, heat, aging, etc are far superior to ordinary zinc oxide powder.   2. Zinc Oxide ZNO Nanostructures in Ceramic industry   Because of very small particle size, large specific surface area and high chemical properties,nano ZnO can significantly lower the sintering densification of materials, save energy, make the ceramic material composition densification, homogenization, improve the performance of ceramic materials, the reliability of its use. Controling the composition and structure of materials on the structural level of nano materials is conducive to give full potential performance of ceramic materials. In addition, because the particle size of ceramic material determines the microstructure and macroscopic properties of ceramic materials, if the particles of the powders are uniformly packed and the sintering shrinkage is uniform and the grain grows uniformly, then the smaller the particle size, the smaller the resulting defects, and the higher the strength of the prepared material, which may result in some unique performance that large particles do not have.   3. Nano Zinc Oxide in Other Areas With the deepening understanding of the performance of nano Zinc Oxide, its applications continue to expand, for example, in the traditional coating technology, adding nano ZnO can further improve the protective capacity, making resistance to atmospheric damage and anti-degradation, color,etc.With a certain percentage of Zinc Oxide nanopowder added to the propionic acid coating, it can be made into excellent nano antibacterial coating. Making use of the sensitive properties of nano ZnO, can produce a high sensitivity gas alarm and hygrometer.           As a new type of semiconductor materials, Zinc Oxide ZNO Nanostructures has become a new type of high-performance fine inorganic products in the 21st century. At present, researchers at home and abroad have developed a variety of methods to prepare various forms of nano zinc oxide products and achieve a lot. However, there are still some shortcomings such as high cost, complicated process and difficulty of industrialization in the preparation method. In addition, the research on the structure and application performance of nano ZnO is not deep, so the follow-up research will focus on the development of simple, high-efficient and easy industrial production methods. With the further study of the material structure on its optical, electrical, magnetic and acoustic properties, it is expected that with the continuous improvement of the preparation method of nano zinc oxide, the nano-size effect of nano-sized oxides, and the study will have a full-speed development stage. by Jemma

Flame Retardant Antimony Trioxide Sb2O3 Nano Powder have heat stability,soluble in acid,insoluble in water and acetic acid

CeO2 nanopowder Cerium oxide nanoparticles(hwnanomaterial.com) for sale for worldwide shipping by fedex,DHL,special lines, etc. sample order and bulk qty are available here.