Stainless Steel 316L Nanoparticles

Stainless Steel Nanoparticles 316 have the characteristics of high pressure resistance use for hot air spraying and manufacturing metal filter.

Nano 316L Stainless Steel Powder have high purity and high corrosion resistance and oxidation resistance.

Good spherical ultra fine spherical stainless steel 316L Nanoparticles / Nanopowders for sale from HONGWU NANO made in china.

Nano stainless steel 316L powder, 70nm, 150nm, widely used as metal ink.

Nano stainless steel 316l powder, 70nm or 150nm,widely used as 3D printing powder, and the printing effect is very well.

Bulk supply  Metal Injection Molding MIM field use 316L stainless steel nanopowders from hongwu international group ltd.

 Copper Oxide Nanoparticle dispersions are suspensions of CUO nanoparticles in water.Price friendly and quality guaranteed.

High filling & low viscosity flake silver powders for epoxy resin conductive adhesive use       Conductive adhesive is a special kind of adhesion agent, mainly composed of resin and conductive fillers, such as silver powder, gold powder, copper powder, nickel powder, graphite powders, etc.), can be used as adhesive materials in microelectronics components, encapsulation manufacturing process.         Conductive adhesive with flake silver powder has excellent electrical conductivity, adhesion and chemical stability. Silver powder almost not be oxidized in the rubber, in air its oxidation speed is very slow, even if is oxidized, silver oxide generated still has good electrical conductivity. therefore, in the market, especially on the high reliability requirements of electric installation, flake silver powders as conductive filler is used mostly. And in the choice of matrix resin, epoxy resin is the best because of its high content of active group, high cohesive strength, good adhesion and excellent mechanical properties.       HW NANO flake silver powder, with particle size <1um, 1-3um,5-8um,10um, purity 99.99%. Specific surface area and apparent/bulk density are adjustable flexibly. It is available with small quantity for researchers and bulk order for industry groups.          Silver powder filling quantity influence on the properties of conductive silver glue. after silver powders as conductive filler is added to the epoxy adhesive, the conductive mechanism is the contact between of silver powders.After system curing, silver powders connect into chain circuit with each other, presents the conductivity. the data shows that the adding quantity of silver powder to 80% or so, the conductivity is the best.  

Magnesium Oxide nano particles antibacterial 30-50nm         Magnesium Oxide nano particle(MGO) with a wide band-gap is an important inorganic material. MgO nano powder is a promising antibacterial agent because of its high resistance to harsh environment.  For the antibacterial ablity of MgO nano powder is related to the particle size. The antibacterial activity was increased with the decrease of the particle size of MgO nano. For particles in the size range 50-70 nm, the bactericidal efficacy of nano-MgO increased slowly with decreasing particle size. When the size under 40 nm, the bactericidal efficacy of MgO nano increases a lot and could kill more bacteria. This proves that the particle size is smaller the antibacterial efficacy of MgO is stronger. MgO nano particles penetrated the bacterial cell wall and cell membrane. For the size is smaller, and then killed more bacteria. Also MgO nano particles with large specific surface area increase as the size of the nano particles decreases. For the large surface area with lots of reactive groups on the particle surface and high antibacterial activity will be obvious.       Hongwu International Group Ltd is committed to provide high-quality Magnesium Oxide nano particles(30-50nm, 99.9%) with the most reasonable price for customers who are doing nanotech research and have formed a complete cycle of researching, manufacturing, marketing and after-sale servicing. Our products have been sold to many countries around the world.

Double walled carbon nanotubes can be dispersed in water to make aqueous dispersion for easier use as required. DWCNT water dispersion can be customized as per requirements for better application.

One of China's leading manufacturer and supplier in ultrafine precious metal nanoparticles including Pt nanoparticles. Good and stable quality are assured, both grams order needs for researches and dozens of kgs order for production can be satisfied. Factory direct sell price. 20nm-1um and Pt water dispersion can be offered. Any need welcome to contact us, thanks.

Hongwu International Group Ltd supply 20-30nm gamma Al2O3 manopowder with 99.99%purity, which is mostly used for catalysis.