Product name: Silver Nanowire conductive ink
Brief introduction: silver nanowire ink is a transparent conductive ink designed and produced by Hongwu Nano on the basis of independent research and development of silver nanowire powder (the nanowire diameter can be adjusted between 20nm-100nm). It mainly adopts screen printing, but also adopts rolling coating, scratch coating, coating, spraying, gravure printing.
The ink containing silver nanowire is used to make a transparent conductive film, and then the touch module is made, which becomes the technical core of flexible and transparent touch control.This innovation in the micro world means that many ordinary objects in our lives will become magic mirrors on our fingertips.
Conductive ink performance indicators:
Silver nanowire conductive ink, solvent is deionized water, solid content of 3‰.Viscosity at 25 ° C is 3-10CP.It can be coated with 30-250 ohm square resistance.
1kg conductive ink can be coated with an area of 30-150m2.The coating thickness is 40-200 microns.
Product features:
Good electrical conductivity, flexibility and adhesion
Environmental friendly, non-toxic, water-based system
High light transmittance and low haze
Base material that can be coated:
PET, PI, CPI, glass, etc
Main application fields:
1. Touch panel, from small size to large size, especially large size of flexible touch screen.The flexible transparent conductive film based on silver nanowire has good electrical conductivity, transparency and flexibility.It is made of flexible touch screen, suitable for foldable smart phones, tablet PC, wearable electronic devices, giant screens.In the future, a wall in the room can become the carrier of touch control, which requires the material of touch control to have a lower resistance. Currently, only the transparent conductive material of nano silver wire can achieve such a large touch control.
2. Smart appliances
3. Technical application of wearable devices
4. Antistatic coating, film switch, etc
Notes when using:
1. Before use, the ink will be slowly mechanically stirred evenly, and ensure the uniformity in the printing process.
2. The film thickness directly affects the haze, light transmittance, square resistance and other indicators after film formation;
3. can be stored at room temperature, recommended storage temperature 5-15℃, the use of ultrasonic vibration is strictly prohibited;
4. After film-forming, the substrate can be washed with pure water, and it is strictly prohibited to wipe and ultrasonic vibration.
English
français
Deutsch
русский
italiano
español
português
日本語
한국의
Türkçe
8620-87226359,8620-87748917
