antibacterial Ag nanopowder

You can buy various high quality nano silver powders products from HW NANO silver powders suppliers.

Micron size, flake morphology, Bright Silver Powder, 99.99% high purity, with different particle size for customers' choice.  It is widely applied for conductive paste.

Large SSA ceramic grade MGO Magnesium Oxide nanopowders   R652: Magnesium Oxide NanoPowder(MgO), 20-30nm, 99.9%, white solid powder.   Application of MGO Magnesium Oxide nanopowders in ceramic field 1. Preparation of ceramic capacitor dielectric material. The grain size of the obtained ceramic can be controlled within the range of 1000nm, with small dielectric loss, good material uniformity, which is suitable for the production of  multilayer ceramic capacitor with large-capacity, high insulation resistance, ultra-thin dielectric layer (dielectric layer is less than 10um). The addition amount is about 0.5%-5%. 2. Nano-ceramic powder, made of nano magnesium oxide, nano silica, nano alumina, nano zinc oxide and other powders, among which, nano magnesium oxide is 0.5%-4.0%, and the obtained nano ceramic powder having a far-infrared radiation, antibacterial, activated water, purified water, the dissolution of trace elements which are beneficial to human health, release of negative ions, improve seed germination rate and other healthy functions. It can be widely used in various ceramic products, environmental protection, textiles, drinking water treatment, equipment and containers such as alcohol and tobacco industries. 3. Sintered with nano Alumina( nano Al2O3), titanium dioxide(TiO2) and other together, obtaining nanocomposite ceramic additives can take place of precious metals Nickel/Ni to produce heat-resisting steel alternative. Wherein the amount of nano-magnesium oxide is 5%-18%. 4. Nanocrystalline composite ceramics makes use of nano titanium dioxide(TiO2), MGO Magnesium Oxide nanopowders, nano rare earth oxides and zirconium dioxide(ZrO2) as part of the additives, and successfully increased the content of Amorphous ZrO2 to 10-30wt%, and obtained a high zirconium Al2O3 -SiO2-ZrO2 ceramics, nanocrystalline composite ceramics, and crystal phase content is more than 90%, the main phase is mullite, cristobalite and tetragonal zirconia, tetragonal zirconia grains dispersed in which size is ≤1μm. Through this method, the properties of the materials are superior to that of conventional methods for preparing the same material. The hardness increased by 30%, the toughness increased by 6%, and the strength increased by 40%. 5. The glass ceramic coating,composed of MGO Magnesium Oxide nanopowders, nano silica(SiO2), boron oxide, nano alumina(Al2O3), cerium oxide nanoparticles, can effectively improve the mechanical strength of the catalyst, including abrasion resistance, hardness, compressive strength and impact resistance; and enhance active centers of the catalyst, thereby increasing the activity of the catalyst, saving the active ingredient and reducing costs. It is mainly used in diesel and gasoline engine for exhaust gas purification treatment processors. Wherein the amount of nano magnesium oxide(MgO) is 5%-18%. 6. Preparation of high toughness ceramic materials, using nano magnesium oxide(MgO) and yttrium oxide(Y2O3) or rare earth oxide as nano composite stabilizer to produce partially stabilized zirconia ceramics with excellent mechanical properties and resistence of high-temperature aging. The ceramic material can be widely used in high-temperature engineering components and advanced refractories. 7. As auxiliary components of the anti-reducing dielectric ceramic material. The addition amount is 0.001%-10mol% 8. As single-side carbon dioxide gas shielding arc welding ceramic plate material. Its addition amount of nano MgO is 1-10 wt% 9. The glass ceramics, nano silica(SiO2), nano titanium dioxide(TiO2), nano alumina(Al2O3), nano magnesium oxide(MgO) sintered glass ceramics can be processed by the float glass method to be transparent, especially for thin film semiconductor substrate, specifically applicable to the display and solar cell. Wherein the amount of nano magnesium oxide(MgO) is 6%-20%. by Corrine    

 Copper Oxide Nanoparticle dispersions are suspensions of CUO nanoparticles in water.Price friendly and quality guaranteed.

China factory direct offer quality nano Sn powder Tin nanoparticles, 99.9% high purity,  70nm / 100nm / 130nm. Nano Sn can be applied for lubricant additives.

Yttria Stabilized Zirconia(YSZ) powder used in oxygen measuring device(oxygen sensor) of coal-fired power plants.

Yttrium Oxide Nanopowders with 99.5% purity and the characteristic of the white color and the high melting point which use as the ceramics material and the refractories.

High filling & low viscosity flake silver powders for epoxy resin conductive adhesive use       Conductive adhesive is a special kind of adhesion agent, mainly composed of resin and conductive fillers, such as silver powder, gold powder, copper powder, nickel powder, graphite powders, etc.), can be used as adhesive materials in microelectronics components, encapsulation manufacturing process.         Conductive adhesive with flake silver powder has excellent electrical conductivity, adhesion and chemical stability. Silver powder almost not be oxidized in the rubber, in air its oxidation speed is very slow, even if is oxidized, silver oxide generated still has good electrical conductivity. therefore, in the market, especially on the high reliability requirements of electric installation, flake silver powders as conductive filler is used mostly. And in the choice of matrix resin, epoxy resin is the best because of its high content of active group, high cohesive strength, good adhesion and excellent mechanical properties.       HW NANO flake silver powder, with particle size <1um, 1-3um,5-8um,10um, purity 99.99%. Specific surface area and apparent/bulk density are adjustable flexibly. It is available with small quantity for researchers and bulk order for industry groups.          Silver powder filling quantity influence on the properties of conductive silver glue. after silver powders as conductive filler is added to the epoxy adhesive, the conductive mechanism is the contact between of silver powders.After system curing, silver powders connect into chain circuit with each other, presents the conductivity. the data shows that the adding quantity of silver powder to 80% or so, the conductivity is the best.  

Nanometer sized copper powders CU for preparation immune enhancement drug use.

Beta silicon carbide powder widely used in semiconductor materials.

high quality zirconia powder as excitation sintering additive

Spherical  Zinc Oxide ZNO Nanostructures Application     Compared with ordinary zinc oxide, Zinc Oxide ZNO Nanostructures has many other excellent performance. At present the main application areas are rubber products, high-grade paint, ink and paint, sunscreen and anti-ultraviolet fabric, sewage treatment,etc.   1. Zinc Oxide ZNO Nanostructures in Rubber Industry   ZnO nanopowder is the most effective inorganic active agent and vulcanization accelerator in rubber industry.  Zinc Oxide ZNO Nanostructures with small particle size 20-30nm, larege specific surface area, good dispersion, loose, porous, good liquidity and good affinity with rubber, easily dispersed whilc melting, low heat plastic material, breaking small deformation , good elasticity, can improve the material process performance and physical properties, thus it's used in the manufacture of high-speed wear-resistant rubber products, such as aircraft tires, high-class passenger car radial tire, with performance of anti-aging, anti-friction fire, long life, and greatly improves finish, mechanical strength, temperature and aging resistance of rubber products,especially wear resistance.  In addition, Zinc Oxide nano as a vulcanization system in the rubber system, whose additive is high.The large specific gravity and  filling amount of ordinary ZnO, whose influence on its material density, product life and energy consumption is detrimental. However, the use of Nano grade Zinc Oxide, the amountis only 30% -50% compared to the ordinary one,which reduces the cost of production, and the performance in the tensile properties, heat, aging, etc are far superior to ordinary zinc oxide powder.   2. Zinc Oxide ZNO Nanostructures in Ceramic industry   Because of very small particle size, large specific surface area and high chemical properties,nano ZnO can significantly lower the sintering densification of materials, save energy, make the ceramic material composition densification, homogenization, improve the performance of ceramic materials, the reliability of its use. Controling the composition and structure of materials on the structural level of nano materials is conducive to give full potential performance of ceramic materials. In addition, because the particle size of ceramic material determines the microstructure and macroscopic properties of ceramic materials, if the particles of the powders are uniformly packed and the sintering shrinkage is uniform and the grain grows uniformly, then the smaller the particle size, the smaller the resulting defects, and the higher the strength of the prepared material, which may result in some unique performance that large particles do not have.   3. Nano Zinc Oxide in Other Areas With the deepening understanding of the performance of nano Zinc Oxide, its applications continue to expand, for example, in the traditional coating technology, adding nano ZnO can further improve the protective capacity, making resistance to atmospheric damage and anti-degradation, color,etc.With a certain percentage of Zinc Oxide nanopowder added to the propionic acid coating, it can be made into excellent nano antibacterial coating. Making use of the sensitive properties of nano ZnO, can produce a high sensitivity gas alarm and hygrometer.           As a new type of semiconductor materials, Zinc Oxide ZNO Nanostructures has become a new type of high-performance fine inorganic products in the 21st century. At present, researchers at home and abroad have developed a variety of methods to prepare various forms of nano zinc oxide products and achieve a lot. However, there are still some shortcomings such as high cost, complicated process and difficulty of industrialization in the preparation method. In addition, the research on the structure and application performance of nano ZnO is not deep, so the follow-up research will focus on the development of simple, high-efficient and easy industrial production methods. With the further study of the material structure on its optical, electrical, magnetic and acoustic properties, it is expected that with the continuous improvement of the preparation method of nano zinc oxide, the nano-size effect of nano-sized oxides, and the study will have a full-speed development stage. by Jemma