High purity 99.99% Nano Lu2O3 Lutetium oxide nanopowders

Cobalt tetroxide is an important magnetic material and P-type semiconductor, which has important applications in heterogeneous catalysis, anode materials for lithium-ion rechargeable batteries, solid-state sensors, electrochromic devices, and solar energy absorbing materials.

China manufacturer and exporter drect offer, ISO certificated factory, assure safe production and stable quality, both sample order and batch orders are available.  CS0.33WO3  100-200nm, 99.9%

Nano Titanium Heptoxide (Ti4O7) is a low-valence titanium oxide with a unique partially reduced Ti4+/Ti3+ mixed-valence structure. Unlike conventional TiO2, it exhibits metallic-like conductivity and exceptional chemical stability, making it valuable in advanced application.

Hongwu nanomaterial can not only supply some nanopowders & nanomaterials of regular size, but also customize them according to customers' requirements to help enterprises to upgrade their products.

Double walled carbon nanotubes can be dispersed in water to make aqueous dispersion for easier use as required. DWCNT water dispersion can be customized as per requirements for better application.

      Scientists using carbon nanotubes(CNTs) and polymer film to develop new fabrics: can resist chemical and biological weapons       Scientists from Lawrence Livermore National Laboratory used carbon nanotubes and flexible polymer film to make synthesis of a breathable, lightweight fabric, wihch could help soldiers against the chemical and biological weapons.  A unique channel created by Carbon Nanotubes has achieved a good air permeability. Meanwhile, the density of the fabric, of which was only 5 nm pore diameter was quite high. It is understood that biological weaponsa such as viruses, usually it's bigger than 10 nm in size. In the experiment, the scientists confirmed that the new material is with the ability to repel dengue virus.  At the same time, to make the research results protects against chemical weapons also, scientists used some chemical-sensitive materials to improve carbon nanotubes, and ultimately achieved the goal.       Here sells purest and cheapest Carbon Nanotubes in the world. Carbon nanotubes is available with different purity grades and surface functionalization. Carbon Nanotubes is produced by Chemical Vapor Deposition (CVD) method by HW NANO and depending on the diameter one can obtain either single-walled Carbon Nanotubes(SWCNTs) ,double-walled carbon nanotubes (DWCNTs)or multi-walled Carbon Nanotubes (MWCNTs). Our current capacity for the production of MWCNTs far exceeds that of other suppliers.   Spec of carbon nanotubes:   1) SWCNT: diameter: 2nm, Length: short tube 1-2um and long tube 5-20um, purity: >91%,95%,99%   2) DWCNT: diameter: 2-5nm, Length: short tube 1-2um and long tube 5-20um, purity: >91%,95%,99%   3) MWCNT: diameter: 8-20nm,30-60nm,60-100nm, Length: short tube 1-2um and long tube 5-20um, purity: >99%   4) Low purity for the three ones above are all available.   5) Functionalized carbon nanotubes: COOH-CNTs, OH-CNTs, Amino-CNTs, Metal coated CNTs...   6) Dispersion: CNTs water dispersion, and CNTs oil dispersion.  

Nano silica powder has water soluble and oil soluble two kinds, particle size is 20-30nm with 99.8%, widely used in plastic reinforcing filler.

In yttrium-added zirconium oxide, yttrium oxide is used as a stabilizer, and this material is mainly a tetragonal structure. It has the highest flexural strength of all zirconia materials, especially when sintered and pressed. Yttrium stabilized zirconia has fine grains and is suitable for use in cutting tools due to its high wear resistance. It is used to cut a very sharp corner part. The excellent crystal grains make the produced ceramics dense, without many pores, and have excellent mechanical strength, corrosion resistance, impact toughness, thermal shock resistance and extremely low thermal conductivity. Because of these characteristics, yttrium stabilized zirconia is mainly used in wear-resistant parts, cutting tools and thermal barrier coatings.

We are a manufacturer of gamma needle-shaped Al2O3 nanopowder with a purity of 99.99% and 20-30nm.Kindly contact us if you need to it.

Our client said Nano colloidal gold and gold nanoparticles of Hongwu are unrivaled – we found that your company the best that we could work with.”

High dispersed Conductive Cu Copper nanowires for sale at competitive prices.

Hongwu International Group LTD sells Boron Carbide powder for applications such as Abrasive, Ceramic, Nuclear, Refractory Material.