y2o3 stabilized zro2, zirconium oxide-yttria stabilized, YSZ(ZrO2+Y2O3) Nanopowder

Y2O3 yttrium oxide nanopowder is widely used as high temperature infrared ceramic material

Yttrium oxide Y2O3 Nano Powder insoluble in water and alkali, soluble in acid.

Nano y2o3 Yttrium oxide powders(30-50nm) is high active, good dispersed, widely used in alloy additives,optical materials.

Yttrium Oxide Nanopowders with 99.5% purity and the characteristic of the white color and the high melting point which use as the ceramics material and the refractories.

Nano yttrium oxide powders in particle size 50-60nm,99.5% purity,widely used in optical materials.

Yttrium oxide nanoparticles could be available in 80-100nm, white powder, widely used in high temperature coating materials.

Rare earth nano yttria powder is widely used as high chemical active electronic materials.

50NM 99% Ultrafine Beta Silicon Carbide SIC Nanoparticle/Nanopowders appear in the form of a grayish green powder having a cubic morphology. The physical properties of these nanoparticles are as below: Basic property:  Decomposition Temperature (K): 2973 Heating Power (KJ/mol): 30.343 Linear Expansion Coefficient (373K): 6.58*10-6 Linear Expansion Coefficient (1173K): 2.98*10-6 Compression Coefficient: 0.21*10-6 Silicon Carbide SIC Nanoparticle/Nanopowders data sheet as follows:  Basic infomation  50nm,99%,beta  Appearance Grayish-green solid powder  Stock#  D501  CAS No.  409-21-2  Hardness (Mohs)  9.5  Density (288K) (g/cm3)  3.216  Synonyms  silicon carbide, sic, carborundum,beta sic, cubic sic, nanoparticles,nanopowders  Capacity  by order, contact us as hwnano@xuzhounano.com Silicon carbide behaves almost like a diamond. It is not only the lightest, but also the hardest ceramic material and has excellent thermal conductivity, low thermal expansion and is very resistant to acids and lyes. typical application for silicon carbide components is dynamic sealing technology using friction bearings and mechanical seals, for instance in pumps and drive systems. Compared to metals, silicon carbide enables highly economical solutions with longer tool life when used with aggressive, high-temperature media. Silicon carbide ceramics are also ideal for use in demanding conditions in ballistics, chemical production, energy technology,  paper manufacturing and as pipe system components. HW NANO can supply 7 kinds of sized silicon carbide SIC nanoparticles including 50nm, 100nm, 0.5um,1-2um,5um, 7um, 15um. purity 99%. Our silicon carbide SIC nanoparticles is available in a wide range of quantities and specifications to meet your particular industrial or scientific application. For further technical information or pricing on silicon carbide SIC nanoparticles , contact us freely, please.

Antimony Tin Oxide (ATO) Nanopowder / Nanoparticles without element chlorine can be manufactured in the form of solid powder and agueous dispersion.

Large SSA ceramic grade MGO Magnesium Oxide nanopowders   R652: Magnesium Oxide NanoPowder(MgO), 20-30nm, 99.9%, white solid powder.   Application of MGO Magnesium Oxide nanopowders in ceramic field 1. Preparation of ceramic capacitor dielectric material. The grain size of the obtained ceramic can be controlled within the range of 1000nm, with small dielectric loss, good material uniformity, which is suitable for the production of  multilayer ceramic capacitor with large-capacity, high insulation resistance, ultra-thin dielectric layer (dielectric layer is less than 10um). The addition amount is about 0.5%-5%. 2. Nano-ceramic powder, made of nano magnesium oxide, nano silica, nano alumina, nano zinc oxide and other powders, among which, nano magnesium oxide is 0.5%-4.0%, and the obtained nano ceramic powder having a far-infrared radiation, antibacterial, activated water, purified water, the dissolution of trace elements which are beneficial to human health, release of negative ions, improve seed germination rate and other healthy functions. It can be widely used in various ceramic products, environmental protection, textiles, drinking water treatment, equipment and containers such as alcohol and tobacco industries. 3. Sintered with nano Alumina( nano Al2O3), titanium dioxide(TiO2) and other together, obtaining nanocomposite ceramic additives can take place of precious metals Nickel/Ni to produce heat-resisting steel alternative. Wherein the amount of nano-magnesium oxide is 5%-18%. 4. Nanocrystalline composite ceramics makes use of nano titanium dioxide(TiO2), MGO Magnesium Oxide nanopowders, nano rare earth oxides and zirconium dioxide(ZrO2) as part of the additives, and successfully increased the content of Amorphous ZrO2 to 10-30wt%, and obtained a high zirconium Al2O3 -SiO2-ZrO2 ceramics, nanocrystalline composite ceramics, and crystal phase content is more than 90%, the main phase is mullite, cristobalite and tetragonal zirconia, tetragonal zirconia grains dispersed in which size is ≤1μm. Through this method, the properties of the materials are superior to that of conventional methods for preparing the same material. The hardness increased by 30%, the toughness increased by 6%, and the strength increased by 40%. 5. The glass ceramic coating,composed of MGO Magnesium Oxide nanopowders, nano silica(SiO2), boron oxide, nano alumina(Al2O3), cerium oxide nanoparticles, can effectively improve the mechanical strength of the catalyst, including abrasion resistance, hardness, compressive strength and impact resistance; and enhance active centers of the catalyst, thereby increasing the activity of the catalyst, saving the active ingredient and reducing costs. It is mainly used in diesel and gasoline engine for exhaust gas purification treatment processors. Wherein the amount of nano magnesium oxide(MgO) is 5%-18%. 6. Preparation of high toughness ceramic materials, using nano magnesium oxide(MgO) and yttrium oxide(Y2O3) or rare earth oxide as nano composite stabilizer to produce partially stabilized zirconia ceramics with excellent mechanical properties and resistence of high-temperature aging. The ceramic material can be widely used in high-temperature engineering components and advanced refractories. 7. As auxiliary components of the anti-reducing dielectric ceramic material. The addition amount is 0.001%-10mol% 8. As single-side carbon dioxide gas shielding arc welding ceramic plate material. Its addition amount of nano MgO is 1-10 wt% 9. The glass ceramics, nano silica(SiO2), nano titanium dioxide(TiO2), nano alumina(Al2O3), nano magnesium oxide(MgO) sintered glass ceramics can be processed by the float glass method to be transparent, especially for thin film semiconductor substrate, specifically applicable to the display and solar cell. Wherein the amount of nano magnesium oxide(MgO) is 6%-20%. by Corrine    

As a multi-functional material, nano tungsten oxide(WO3 nanopowder) has been widely used in catalysis, lithium-ion batteries, solar cells, fuel cells, photothermal therapy and other fields with excellent performance.

Nano Copper Powder have good compressibility and high strength,mainly used in conductive paste and pressure-sensitive copper slurry.