Permanent Magnetic Fe-Cr-Co Iron Chrome Cobalt Alloy Powder

Polished Precision zirconia ceramic piston plunger

Fullerene C60 nanoparticles used for photoconductor in photocopier.

Ultra-fine Cu2O copper oxide nanoparticles used as catalyst.

As a typical representative of one-dimensional nanomaterials, silicon nanowires not only have the special properties of semiconductors, but also show physical properties such as field emission, thermal conductivity and visible light luminescence that are different from bulk silicon materials. Si nanowires have huge potential application value in devices and new energy.

Spherical  Zinc Oxide ZNO Nanostructures Application     Compared with ordinary zinc oxide, Zinc Oxide ZNO Nanostructures has many other excellent performance. At present the main application areas are rubber products, high-grade paint, ink and paint, sunscreen and anti-ultraviolet fabric, sewage treatment,etc.   1. Zinc Oxide ZNO Nanostructures in Rubber Industry   ZnO nanopowder is the most effective inorganic active agent and vulcanization accelerator in rubber industry.  Zinc Oxide ZNO Nanostructures with small particle size 20-30nm, larege specific surface area, good dispersion, loose, porous, good liquidity and good affinity with rubber, easily dispersed whilc melting, low heat plastic material, breaking small deformation , good elasticity, can improve the material process performance and physical properties, thus it's used in the manufacture of high-speed wear-resistant rubber products, such as aircraft tires, high-class passenger car radial tire, with performance of anti-aging, anti-friction fire, long life, and greatly improves finish, mechanical strength, temperature and aging resistance of rubber products,especially wear resistance.  In addition, Zinc Oxide nano as a vulcanization system in the rubber system, whose additive is high.The large specific gravity and  filling amount of ordinary ZnO, whose influence on its material density, product life and energy consumption is detrimental. However, the use of Nano grade Zinc Oxide, the amountis only 30% -50% compared to the ordinary one,which reduces the cost of production, and the performance in the tensile properties, heat, aging, etc are far superior to ordinary zinc oxide powder.   2. Zinc Oxide ZNO Nanostructures in Ceramic industry   Because of very small particle size, large specific surface area and high chemical properties,nano ZnO can significantly lower the sintering densification of materials, save energy, make the ceramic material composition densification, homogenization, improve the performance of ceramic materials, the reliability of its use. Controling the composition and structure of materials on the structural level of nano materials is conducive to give full potential performance of ceramic materials. In addition, because the particle size of ceramic material determines the microstructure and macroscopic properties of ceramic materials, if the particles of the powders are uniformly packed and the sintering shrinkage is uniform and the grain grows uniformly, then the smaller the particle size, the smaller the resulting defects, and the higher the strength of the prepared material, which may result in some unique performance that large particles do not have.   3. Nano Zinc Oxide in Other Areas With the deepening understanding of the performance of nano Zinc Oxide, its applications continue to expand, for example, in the traditional coating technology, adding nano ZnO can further improve the protective capacity, making resistance to atmospheric damage and anti-degradation, color,etc.With a certain percentage of Zinc Oxide nanopowder added to the propionic acid coating, it can be made into excellent nano antibacterial coating. Making use of the sensitive properties of nano ZnO, can produce a high sensitivity gas alarm and hygrometer.           As a new type of semiconductor materials, Zinc Oxide ZNO Nanostructures has become a new type of high-performance fine inorganic products in the 21st century. At present, researchers at home and abroad have developed a variety of methods to prepare various forms of nano zinc oxide products and achieve a lot. However, there are still some shortcomings such as high cost, complicated process and difficulty of industrialization in the preparation method. In addition, the research on the structure and application performance of nano ZnO is not deep, so the follow-up research will focus on the development of simple, high-efficient and easy industrial production methods. With the further study of the material structure on its optical, electrical, magnetic and acoustic properties, it is expected that with the continuous improvement of the preparation method of nano zinc oxide, the nano-size effect of nano-sized oxides, and the study will have a full-speed development stage. by Jemma

HW nano material sale high purity bi2o3 nano bismuth oxide for electronic ceramics and piezoresistor use O765: Nano bismuth oxide, particle size 20-30nm,99.5% O766: Nano bismuth oxide, particle size 30-50nm,99.5%       Bi2O3 nano bismuth oxide is an important functional material. The use of bismuth oxide is not only a good catalyst for organic synthesis, ceramic coloring agents, plastic flame retardants, pharmaceutical astringents, glass additives, high refractive glass and nuclear engineering glass manufacturing and nuclear reactor fuel, but also is a kind of important doping powder material in the electronics industry.       Bi2O3 nano bismuth oxide powder is mainly used in the chemical industry (such as chemical reagents, bismuth salt manufacturing, etc.), the glass industry (mainly used for coloring), the electronics industry (electronic ceramics, etc.) and other industries (such as fire paper manufacturing, nuclear reactor fuel. Among them, the electronics industry is the most widely used bismuth oxide industry, mainly used in varistors, thermistors, zinc oxide arrester and CRT, and other fields. If the material from the points, bismuth oxide is mainly used for electronic ceramic powder materials, electrolyte materials, optoelectronic materials, high-temperature superconducting materials, catalysts. Electronic ceramic powder materials the field of electronic ceramics are a mature and dynamic field for the application of bismuth oxide.        Bismuth oxide as an important additive in the electronic ceramic powder material, the purity of the general requirements of more than 99.5%. The main application targets are three categories that are zinc oxide varistor, ceramic capacitors, and ferrite magnetic materials. In the development of electronic ceramics, the United States is one of the top one in the world. While Japan relies on mass production and advanced technology to occupy the world's ceramic market share of 60%. With the nano bismuth oxide research and development and homogenization of manufacturing technology innovation will also greatly promote the electronic ceramic-related components to improve performance and reduce production costs. Bismuth oxide in zinc oxide varistor mainly plays a role in the formation of agents, zinc oxide varistor with high nonlinear voltammetry, the characteristics of the main contributors.

Hongwu Nickel nanowires have a wide range of potential applications in electronic materials, catalysis, polymers, magnetic storage ultra-high density recording materials, sensors and self-lubricating materials.

Nano stainless steel 316l powder, 70nm or 150nm,widely used as 3D printing powder, and the printing effect is very well.

Hongwu International Group Ltd supply 500nm and 1-3um with 99%purity. B4C superfine powders for ceramic have good properties and used in various fields.

Ruthenium powder with high quality and use as the catalyst.

We have profession technical for silver nanowire dispersion.

 Boron Carbide available in 1-3um with 99% purity could use in the ceremic materical and so on.